Wheel Bearing - 07/26/2010

Time to tackle that axle bearing. It's a c-clip rear so it should be easy...

Kinda got some grooves worn in it...



Eww. Chewed it up pretty good.

Other side is okay...

The bearing puller. Without this tool, life is evil and you hate it when working on this stuff.

Something's missing!

The new bearing! Made in the USA even by Timken!

Old nasty seal.

Not bad! Steve sure knows how to do this stuff. The other bearing is fine, but the seal will be replaced since, you know, 35 year old seal and all that. Leaving a car sitting on the rotors and drums in the mud for an extended period of time is not a good idea kids!

Return to '75 Trans Am Page

Last updated July 26th, 2010